Fax Software

Community Forums

#6331

Anonymous
Member

You should be able to configure direct to a com port providing it is configured in Windows and can be accessed in Windows communication program (such as HyperTerminal)

If the modems are external, you should see the physical com ports listed (COM1, COM2 or/and COM3, COM4)

Internal software (HSP or WinModem) driven modems generally install using a non-standard IRQ (for example. COM 3, IRQ 17) which WinFax probably won’t list properly.

Switching to another COM port setting might solve this problem, but I would recommend TAPI settings as is especially if you are using an internal HSP or WinModem (software driven) modem.