Fax Software

Community Forums

#7613

Anonymous
Member

Hope this is what you’re looking for.
It is set to: regular telephone; TAPI (which is strange because on the COM Port Test, it showed as residing on COM3, but I can’t select anything other than COM1 or TAPI); initialize at 2400; Class 1; transmission speed as fast as possible; minimum send at any rate; options – high speed compression; string 1: AT&F&D2&C1&H1S7=55; string 2: ATS36=0; flow control: AT&H1 (hardware flow control NOT checked); reset: ATZ