Fax Software

Community Forums

#8418

Anonymous
Member

Check out this topic on the Trendnet modem, you might want to try updating the drivers for the modem if you have not already done so. Steps are indicated on the Trendnet web page link

http://www.getfaxing.com/cgi-bin….7;t=196

http://www.trendnet.com/downloads/info/tfm-560x.htm

LT/Agere fax modems suggested initialization string settings under Modem settings:

Suggested Initialization String: AT&F&C1&D2S7=60
Hardware Flow Control:
Software Flow Control: ATQ1 or AT&K4

Uncheck “Use hardware flow control.”
Uncheck everything under Options.

Edited By Moderator on 1170360331