Fax Software

Community Forums

This topic contains 5 replies, has 0 voices, and was last updated by  Anonymous 12 years, 12 months ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #3656

    fbdenman
    Member

    Using Winfax 10.02 with a Courier v.Everything modem on WinXPP SP2, I have no problem sending faxes to recipients in the lower 48 states. However, I am unable to send to either of two fax machines in Sitka, AK. When I dial and listen, it’s a noisy connection, and it’s probably going through a satellite.

    Below the dashed line is a debug log spanning several calls. I’d really appreciate any suggestions for resolving this.

    TIA

    Frank


    0000.0 :19-7-06 Debug Mode enabled – file:
    0000.0 :Sep 10 2001
    4194304
    0000.4 :Auto receive
    0000.4 :Auto Receive
    0000.4 :Re-Init Reception : Auto Receive
    0000.4 :Initialize Receive : rx=0
    0000.4 :Device match
    0000.4 :Name: Courier V.Everything EXT PnP (V90-x2)
    0000.5 :Device match
    0000.5 :Name: Courier V.Everything EXT PnP (V90-x2)
    0000.5 :TAPI soft-open port
    1
    1
    0001.3 :>E0V1
    0001.9 :
    0002.1 :WIN32 TAPI soft close port
    0
    0002.5 :state: IDLE
    0002.5 :Device match
    0002.5 :Name: Courier V.Everything EXT PnP (V90-x2)
    0002.5 :state: AUTORECEIVE
    0002.5 :Modem enabled.
    0002.5 :state: AUTORECEIVE
    0014.5 :Get send event
    0390.3 :End Session Query
    0390.3 :End Session
    0396.4 :End Session Query
    0396.4 :End Session
    0473.5 :Get send event
    0473.5 :FAX : 1984
    0473.5 :Event found
    0473.8 :Device match
    0473.8 :Name: Courier V.Everything EXT PnP (V90-x2)
    0473.8 :Start transmit
    0474.0 :Device match
    0474.0 :Name: Courier V.Everything EXT PnP (V90-x2)
    0474.0 :Start Send
    0474.0 :TAPI soft-open port
    1
    1
    0474.6 :state: INITIALIZING
    0474.6 :Setting modem…
    0474.7 :>AT
    0475.3 :
    0475.4 :>E0V1
    0475.6 :
    0475.8 :>AT&F&D2&C1&H1&R2&I0S7=55
    0476.0 :
    0476.2 :>ATS36=0
    0476.4 :
    0476.5 :>AT&H1&R2&I0
    0476.7 :
    0476.8 :>E0V1&D2S0=0S8=2
    0477.0 :
    0477.2 :>+FCLASS=1
    0477.3 :
    0477.8 :>+FTM=?
    0477.9 :< <24,48,72,73,74,96,97,98,121,122,145,146
    0478.0 :>+FRM=?
    0478.1 :< <24,48,72,73,74,96,97,98,121,122,145,146
    0478.5 :state: IDLE
    0478.5 :state: IDLE
    0478.5 :Setting speaker…
    0478.5 :>E0V1M1L1
    0478.7 :
    0478.7 :>+FCLASS=1
    0478.8 :
    38400
    0478.9 :state: DIALING
    0479.5 :Transmit Phase A begins
    0479.5 :=======================
    0479.5 :Connecting…
    0479.5 :>X4DT19074634083
    0511.9 :
    0511.9 :Connecting…
    0511.9 :Transmit Phase B begins
    0511.9 :=======================
    0511.9 :state: SENDING
    0511.9 :Negotiating…
    0512.1 :
    0512.1 :Invalid frame received
    0512.1 :+FRH=3
    0512.1 :>+FRH=3
    0514.2 :
    0514.2 :NO CARRIER
    0514.2 :+FRH=3
    0514.2 :>+FRH=3
    0514.9 :
    0516.7 :
    0516.7 :Invalid frame received
    0516.7 :+FRH=3
    0516.7 :>+FRH=3
    0518.8 :
    0518.8 :NO CARRIER
    0518.8 :+FRH=3
    0518.8 :>+FRH=3
    0520.9 :
    0520.9 :NO CARRIER
    0520.9 :+FRH=3
    0520.9 :>+FRH=3
    0523.0 :
    0523.0 :NO CARRIER
    0523.0 :+FRH=3
    0523.0 :>+FRH=3
    0525.1 :
    0525.1 :NO CARRIER
    0525.1 :+FRH=3
    0525.1 :>+FRH=3
    0527.2 :
    0527.2 :NO CARRIER
    0527.2 :+FRH=3
    0527.2 :>+FRH=3
    0529.3 :
    0529.3 :NO CARRIER
    0529.3 :+FRH=3
    0529.3 :>+FRH=3
    0531.4 :
    0531.4 :NO CARRIER
    0531.4 :+FRH=3
    0531.4 :>+FRH=3
    0533.5 :
    0533.5 :NO CARRIER
    0533.5 :+FRH=3
    0533.5 :>+FRH=3
    0535.6 :
    0535.6 :NO CARRIER
    0535.7 :+FRH=3
    0535.7 :>+FRH=3
    0537.7 :
    0537.7 :NO CARRIER
    0537.8 :+FRH=3
    0537.8 :>+FRH=3
    0539.9 :
    0539.9 :NO CARRIER
    0539.9 :+FRH=3
    0539.9 :>+FRH=3
    0542.0 :
    0542.0 :NO CARRIER
    0542.0 :+FRH=3
    0542.0 :>+FRH=3
    0544.1 :
    0544.1 :NO CARRIER
    0544.1 :+FRH=3
    0544.1 :>+FRH=3
    0546.2 :
    0546.2 :NO CARRIER
    0546.2 :+FRH=3
    0546.2 :>+FRH=3
    0548.3 :
    0548.3 :NO CARRIER
    0548.3 :No carrier.
    0548.3 :state: TERMINATING
    0548.3 :>AT
    0548.5 :
    0548.7 :>H0
    0549.0 :
    0549.1 :>+FCLASS=0
    0549.2 :
    0549.4 :state: TERMINATING
    0549.5 :WIN32 TAPI soft close port
    0549.9 :voice enable
    0549.9 :Device match
    0549.9 :Name: Courier V.Everything EXT PnP (V90-x2)
    0549.9 :state: AUTORECEIVE
    0549.9 :Modem enabled.
    0549.9 :state: AUTORECEIVE
    0549.9 :state: AUTORECEIVE
    0549.9 :End of Send
    0552.9 :Get send event
    0552.9 :FAX : 1984
    0648.9 :Get send event
    0648.9 :FAX : 1984
    0648.9 :Event found
    0649.3 :Device match
    0649.3 :Name: Courier V.Everything EXT PnP (V90-x2)
    0649.3 :Start transmit
    0649.4 :Device match
    0649.4 :Name: Courier V.Everything EXT PnP (V90-x2)
    0649.4 :Start Send
    0649.4 :TAPI soft-open port
    1
    1
    0650.1 :state: INITIALIZING
    0650.1 :Setting modem…
    0650.1 :>AT
    0650.7 :
    0650.8 :>E0V1
    0651.0 :
    0651.2 :>AT&F&D2&C1&H1&R2&I0S7=55
    0651.5 :
    0651.6 :>ATS36=0
    0651.8 :
    0651.9 :>AT&H1&R2&I0
    0652.1 :
    0652.2 :>E0V1&D2S0=0S8=2
    0652.4 :
    0652.6 :>+FCLASS=1
    0652.7 :
    0653.6 :state: IDLE
    0653.6 :state: IDLE
    0653.6 :Setting speaker…
    0653.6 :>E0V1M1L1
    0653.8 :
    0653.9 :>+FCLASS=1
    0653.9 :
    38400
    0654.0 :state: DIALING
    0654.6 :Transmit Phase A begins
    0654.6 :=======================
    0654.6 :Connecting…
    0654.6 :>X4DT19074634083
    0687.7 :
    0687.7 :Connecting…
    0687.7 :Transmit Phase B begins
    0687.7 :=======================
    0687.7 :state: SENDING
    0687.7 :Negotiating…
    0687.9 :
    0687.9 :Invalid frame received
    0687.9 :+FRH=3
    0687.9 :>+FRH=3
    0690.0 :
    0690.0 :NO CARRIER
    0690.0 :+FRH=3
    0690.0 :>+FRH=3
    0691.1 :
    0691.1 :
    0691.1 :Invalid frame received
    0691.1 :+FRH=3
    0691.1 :>+FRH=3
    0693.2 :
    0693.2 :NO CARRIER
    0693.2 :+FRH=3
    0693.2 :>+FRH=3
    0695.3 :
    0695.3 :NO CARRIER
    0695.4 :+FRH=3
    0695.4 :>+FRH=3
    0697.5 :
    0697.5 :NO CARRIER
    0697.5 :+FRH=3
    0697.5 :>+FRH=3
    0699.6 :
    0699.6 :NO CARRIER
    0699.6 :+FRH=3
    0699.6 :>+FRH=3
    0701.7 :
    0701.7 :NO CARRIER
    0701.7 :+FRH=3
    0701.7 :>+FRH=3
    0703.4 :
    0703.4 :
    0703.4 :Invalid frame received
    0703.4 :+FRH=3
    0703.4 :>+FRH=3
    0705.5 :
    0705.5 :NO CARRIER
    0705.5 :+FRH=3
    0705.5 :>+FRH=3
    0707.6 :
    0707.6 :NO CARRIER
    0707.6 :+FRH=3
    0707.6 :>+FRH=3
    0709.7 :
    0709.7 :NO CARRIER
    0709.7 :+FRH=3
    0709.7 :>+FRH=3
    0711.8 :
    0711.8 :NO CARRIER
    0711.8 :+FRH=3
    0711.8 :>+FRH=3
    0713.9 :
    0713.9 :NO CARRIER
    0714.0 :+FRH=3
    0714.0 :>+FRH=3
    0716.0 :
    0716.0 :NO CARRIER
    0716.1 :+FRH=3
    0716.1 :>+FRH=3
    0718.2 :
    0718.2 :NO CARRIER
    0718.2 :+FRH=3
    0718.2 :>+FRH=3
    0720.3 :
    0720.3 :NO CARRIER
    0720.3 :+FRH=3
    0720.3 :>+FRH=3
    0722.4 :
    0722.4 :NO CARRIER
    0722.4 :+FRH=3
    0722.4 :>+FRH=3
    0724.5 :
    0724.5 :NO CARRIER
    0724.5 :No carrier.
    0724.5 :state: TERMINATING
    0724.5 :>AT
    0724.7 :
    0724.9 :>H0
    0725.2 :
    0725.3 :>+FCLASS=0
    0725.4 :
    0725.6 :state: TERMINATING
    0725.7 :WIN32 TAPI soft close port
    0726.1 :voice enable
    0726.1 :Device match
    0726.1 :Name: Courier V.Everything EXT PnP (V90-x2)
    0726.1 :state: AUTORECEIVE
    0726.1 :Modem enabled.
    0726.1 :state: AUTORECEIVE
    0726.1 :state: AUTORECEIVE
    0726.1 :End of Send
    0729.1 :Get send event
    0729.1 :FAX : 1984
    0825.2 :Get send event
    0825.2 :FAX : 1984
    0825.2 :Event found
    0825.5 :Device match
    0825.5 :Name: Courier V.Everything EXT PnP (V90-x2)
    0825.5 :Start transmit
    0825.6 :Device match
    0825.6 :Name: Courier V.Everything EXT PnP (V90-x2)
    0825.6 :Start Send
    0825.6 :TAPI soft-open port
    1
    1
    0826.3 :state: INITIALIZING
    0826.3 :Setting modem…
    0826.4 :>AT
    0827.0 :
    0827.0 :>E0V1
    0827.2 :
    0827.5 :>AT&F&D2&C1&H1&R2&I0S7=55
    0827.7 :
    0827.8 :>ATS36=0
    0828.0 :
    0828.1 :>AT&H1&R2&I0
    0828.3 :
    0828.5 :>E0V1&D2S0=0S8=2
    0828.7 :
    0828.9 :>+FCLASS=1
    0828.9 :
    0829.9 :state: IDLE
    0829.9 :state: IDLE
    0829.9 :Setting speaker…
    0829.9 :>E0V1M1L1
    0830.1 :
    0830.1 :>+FCLASS=1
    0830.2 :
    38400
    0830.3 :state: DIALING
    0830.8 :Transmit Phase A begins
    0830.8 :=======================
    0830.8 :Connecting…
    0830.8 :>X4DT19074634083
    0854.8 :< 0854.8 :Line busy.
    0854.8 :Transmit Phase B begins
    0854.8 :=======================
    0854.8 :state: IDLE
    0854.8 :state: IDLE
    0854.8 :>AT
    0856.5 :modem fails to respond
    0858.3 :modem fails to respond
    0858.4 :>H0
    0858.4 :User cancelled…
    0858.6 :
    0858.7 :>+FCLASS=0
    0858.8 :
    0859.0 :state: TERMINATING
    0859.1 :WIN32 TAPI soft close port
    0863.5 :Can’t get TAPI Confirmation
    0863.5 :voice enable
    0863.5 :Device match
    0863.5 :Name: Courier V.Everything EXT PnP (V90-x2)
    0863.5 :state: AUTORECEIVE
    0863.5 :Modem enabled.
    0863.5 :state: AUTORECEIVE
    0863.5 :state: AUTORECEIVE
    0863.5 :End of Send
    0866.5 :AbortFax
    0866.5 :not busy!
    0867.5 :Get send event
    1077.5 :Get send event
    1077.5 :FAX : 2571
    1077.5 :Event found
    1077.9 :Device match
    1077.9 :Name: Courier V.Everything EXT PnP (V90-x2)
    1077.9 :Start transmit
    1078.0 :Device match
    1078.0 :Name: Courier V.Everything EXT PnP (V90-x2)
    1078.0 :Start Send
    1078.0 :TAPI soft-open port
    1
    1
    1078.7 :state: INITIALIZING
    1078.7 :Setting modem…
    1078.7 :>AT
    1079.3 :
    1079.4 :>E0V1
    1079.6 :
    1079.8 :>AT&F&D2&C1&H1&R2&I0S7=55
    1080.1 :
    1080.2 :>ATS36=0
    1080.4 :
    1080.5 :>AT&H1&R2&I0
    1080.7 :
    1080.8 :>E0V1&D2S0=0S8=2
    1081.0 :
    1081.2 :>+FCLASS=1
    1081.3 :
    1082.2 :state: IDLE
    1082.2 :state: IDLE
    1082.2 :Setting speaker…
    1082.2 :>E0V1M1L1
    1082.4 :
    1082.5 :>+FCLASS=1
    1082.5 :
    38400
    1082.7 :state: DIALING
    1083.2 :Transmit Phase A begins
    1083.2 :=======================
    1083.2 :Connecting…
    1083.2 :>X4DT19074634083
    1090.3 :User cancelled…
    1090.3 :Transmit Phase B begins
    1090.3 :=======================
    1090.3 :state: SENDING
    1090.3 :state: SENDING
    1090.3 :>AT
    1092.5 :modem fails to respond
    1092.6 :>H0
    1092.8 :
    1092.9 :>+FCLASS=0
    1093.0 :
    1093.2 :state: TERMINATING
    1093.3 :WIN32 TAPI soft close port
    1097.7 :Can’t get TAPI Confirmation
    1097.7 :voice enable
    1097.7 :Device match
    1097.7 :Name: Courier V.Everything EXT PnP (V90-x2)
    1097.7 :state: AUTORECEIVE
    1097.7 :Modem enabled.
    1097.7 :state: AUTORECEIVE
    1097.7 :state: AUTORECEIVE
    1097.7 :End of Send
    1100.7 :AbortFax
    1100.7 :not busy!
    1100.7 :AbortFax
    1100.7 :not busy!
    1101.7 :Get send event
    1101.7 :FAX : 2571
    1101.7 :Event found
    1102.1 :Device match
    1102.1 :Name: Courier V.Everything EXT PnP (V90-x2)
    1102.1 :Start transmit
    1102.2 :Device match
    1102.2 :Name: Courier V.Everything EXT PnP (V90-x2)
    1102.2 :Start Send
    1102.2 :TAPI soft-open port
    1
    1
    1102.9 :state: INITIALIZING
    1102.9 :Setting modem…
    1102.9 :>AT
    1103.5 :
    1103.6 :>E0V1
    1103.8 :
    1104.0 :>AT&F&D2&C1&H1&R2&I0S7=55
    1104.2 :
    1104.4 :>ATS36=0
    1104.6 :
    1104.7 :>AT&H1&R2&I0
    1104.9 :
    1105.0 :>E0V1&D2S0=0S8=2
    1105.2 :
    1105.4 :>+FCLASS=1
    1105.5 :
    1106.4 :state: IDLE
    1106.4 :state: IDLE
    1106.4 :Setting speaker…
    1106.4 :>E0V1M1L1
    1106.6 :
    1106.7 :>+FCLASS=1
    1106.7 :
    38400
    1106.8 :state: DIALING
    1107.4 :Transmit Phase A begins
    1107.4 :=======================
    1107.4 :Connecting…
    1107.4 :>X4DT19074636657
    1137.7 :
    1137.7 :Connecting…
    1137.7 :Transmit Phase B begins
    1137.7 :=======================
    1137.7 :state: SENDING
    1137.7 :Negotiating…
    1137.7 :
    1137.7 :Invalid frame received
    1137.7 :+FRH=3
    1137.7 :>+FRH=3
    1137.8 :
    1137.8 :
    1137.8 :Invalid frame received
    1137.8 :+FRH=3
    1137.8 :>+FRH=3
    1137.9 :
    1138.0 :
    1138.0 :Invalid frame received
    1138.0 :+FRH=3
    1138.0 :>+FRH=3
    1138.1 :
    1138.1 :
    1138.1 :Invalid frame received
    1138.1 :+FRH=3
    1138.1 :>+FRH=3
    1138.2 :
    1138.2 :
    1138.2 :Invalid frame received
    1138.2 :+FRH=3
    1138.2 :>+FRH=3
    1138.3 :
    1138.3 :
    1138.3 :Invalid frame received
    1138.3 :+FRH=3
    1138.3 :>+FRH=3
    1138.4 :
    1138.5 :
    1138.5 :Invalid frame received
    1138.5 :+FRH=3
    1138.5 :>+FRH=3
    1138.6 :
    1138.6 :
    1138.6 :Invalid frame received
    1138.6 :+FRH=3
    1138.6 :>+FRH=3
    1138.7 :
    1138.7 :
    1138.7 :Invalid frame received
    1138.7 :+FRH=3
    1138.7 :>+FRH=3
    1138.9 :
    1140.7 :
    1140.7 :Invalid frame received
    1140.7 :+FRH=3
    1140.7 :>+FRH=3
    1142.8 :
    1142.8 :NO CARRIER
    1142.8 :+FRH=3
    1142.8 :>+FRH=3
    1144.9 :
    1144.9 :NO CARRIER
    1144.9 :+FRH=3
    1144.9 :>+FRH=3
    1147.0 :
    1147.0 :NO CARRIER
    1147.0 :+FRH=3
    1147.0 :>+FRH=3
    1149.1 :
    1149.1 :NO CARRIER
    1149.1 :+FRH=3
    1149.1 :>+FRH=3
    1151.2 :
    1151.2 :NO CARRIER
    1151.2 :+FRH=3
    1151.2 :>+FRH=3
    1153.3 :
    1153.3 :NO CARRIER
    1153.3 :+FRH=3
    1153.3 :>+FRH=3
    1155.4 :
    1155.4 :NO CARRIER
    1155.4 :+FRH=3
    1155.4 :>+FRH=3
    1157.5 :
    1157.5 :NO CARRIER
    1157.5 :+FRH=3
    1157.5 :>+FRH=3
    1159.6 :
    1159.6 :NO CARRIER
    1159.7 :+FRH=3
    1159.7 :>+FRH=3
    1161.7 :
    1161.7 :NO CARRIER
    1161.8 :+FRH=3
    1161.8 :>+FRH=3
    1163.9 :
    1163.9 :NO CARRIER
    1163.9 :+FRH=3
    1163.9 :>+FRH=3
    1166.0 :
    1166.0 :NO CARRIER
    1166.0 :+FRH=3
    1166.0 :>+FRH=3
    1168.1 :
    1168.1 :NO CARRIER
    1168.1 :+FRH=3
    1168.1 :>+FRH=3
    1170.2 :
    1170.2 :NO CARRIER
    1170.2 :+FRH=3
    1170.2 :>+FRH=3
    1172.3 :
    1172.3 :NO CARRIER
    1172.3 :+FRH=3
    1172.3 :>+FRH=3
    1174.4 :
    1174.4 :NO CARRIER
    1174.4 :No carrier.


    0000.0 :19-7-06 Debug Mode enabled – file:
    0000.0 :19-7-06 Debug Mode enabled – file:
    Courier V.Everything EXT PnP (V90-x2).log
    0000.0 :Sep 10 2001
    4194304
    0000.0 :Auto receive
    0000.0 :Auto Receive
    0000.0 :Re-Init Reception : Auto Receive
    0000.0 :Initialize Receive : rx=0
    0000.0 :Device match
    0000.0 :Name: Courier V.Everything EXT PnP (V90-x2)
    0000.1 :Device match
    0000.1 :Name: Courier V.Everything EXT PnP (V90-x2)
    0000.1 :TAPI soft-open port
    1
    1
    0000.8 :>E0V1
    0001.4 :
    0001.6 :WIN32 TAPI soft close port
    0
    0002.0 :state: IDLE
    0002.0 :Device match
    0002.0 :Name: Courier V.Everything EXT PnP (V90-x2)
    0002.0 :state: AUTORECEIVE
    0002.0 :Modem enabled.
    0002.0 :state: AUTORECEIVE
    0014.0 :Get send event
    0014.0 :FAX : 2571
    0014.0 :Event found
    0014.3 :Device match
    0014.3 :Name: Courier V.Everything EXT PnP (V90-x2)
    0014.3 :Start transmit
    0014.4 :Device match
    0014.4 :Name: Courier V.Everything EXT PnP (V90-x2)
    0014.4 :Start Send
    0014.4 :TAPI soft-open port
    1
    1
    0015.1 :state: INITIALIZING
    0015.1 :Setting modem…
    0015.2 :>AT
    0015.7 :
    0015.8 :>E0V1
    0016.0 :
    0016.3 :>AT&F&D2&C1&H1&R2&I0S7=55
    0016.5 :
    0016.6 :>ATS36=0
    0016.8 :
    0016.9 :>AT&H1&R2&I0
    0017.1 :
    0017.3 :>E0V1&D2S0=0S8=2
    0017.5 :
    0017.7 :>+FCLASS=1
    0017.7 :
    0018.3 :>+FTM=?
    0018.4 :< <24,48,72,73,74,96,97,98,121,122,145,146
    0018.5 :>+FRM=?
    0018.6 :< <24,48,72,73,74,96,97,98,121,122,145,146
    0019.0 :state: IDLE
    0019.0 :state: IDLE
    0019.0 :Setting speaker…
    0019.0 :>E0V1M1L1
    0019.2 :
    0019.2 :>+FCLASS=1
    0019.3 :
    38400
    0019.4 :state: DIALING
    0020.0 :Transmit Phase A begins
    0020.0 :=======================
    0020.0 :Connecting…
    0020.0 :>X4DT19074636657
    0022.2 :< 0022.2 :No dial tone.
    0022.2 :Transmit Phase B begins
    0022.2 :=======================
    0022.2 :state: IDLE
    0022.2 :state: IDLE
    0022.2 :>AT
    0022.4 :
    0022.5 :>H0
    0022.7 :
    0022.8 :>+FCLASS=0
    0022.9 :
    0023.2 :state: TERMINATING
    0023.3 :WIN32 TAPI soft close port
    0023.7 :voice enable
    0023.7 :Device match
    0023.7 :Name: Courier V.Everything EXT PnP (V90-x2)
    0023.7 :state: AUTORECEIVE
    0023.7 :Modem enabled.
    0023.7 :state: AUTORECEIVE
    0023.7 :state: AUTORECEIVE
    0023.7 :End of Send
    0026.7 :Get send event
    0026.7 :FAX : 2571
    0122.7 :Get send event
    0122.7 :FAX : 2571
    0122.7 :Event found
    0123.0 :Device match
    0123.0 :Name: Courier V.Everything EXT PnP (V90-x2)
    0123.0 :Start transmit
    0123.2 :Device match
    0123.2 :Name: Courier V.Everything EXT PnP (V90-x2)
    0123.2 :Start Send
    0123.2 :TAPI soft-open port
    1
    1
    0123.8 :state: INITIALIZING
    0123.8 :Setting modem…
    0123.9 :>AT
    0124.5 :
    0124.6 :>E0V1
    0124.8 :
    0125.0 :>AT&F&D2&C1&H1&R2&I0S7=55
    0125.2 :
    0125.4 :>ATS36=0
    0125.6 :
    0125.7 :>AT&H1&R2&I0
    0125.9 :
    0126.0 :>E0V1&D2S0=0S8=2
    0126.2 :
    0126.4 :>+FCLASS=1
    0126.5 :
    0127.4 :state: IDLE
    0127.4 :state: IDLE
    0127.4 :Setting speaker…
    0127.4 :>E0V1M1L1
    0127.6 :
    0127.6 :>+FCLASS=1
    0127.7 :
    38400
    0127.8 :state: DIALING
    0128.4 :Transmit Phase A begins
    0128.4 :=======================
    0128.4 :Connecting…
    0128.4 :>X4DT19074636657
    0157.3 :
    0157.3 :Connecting…
    0157.3 :Transmit Phase B begins
    0157.3 :=======================
    0157.3 :state: SENDING
    0157.3 :Negotiating…
    0157.5 :
    0157.5 :Invalid frame received
    0157.5 :+FRH=3
    0157.5 :>+FRH=3
    0159.6 :
    0159.6 :NO CARRIER
    0159.6 :+FRH=3
    0159.6 :>+FRH=3
    0161.7 :
    0161.7 :NO CARRIER
    0161.7 :+FRH=3
    0161.7 :>+FRH=3
    0163.8 :
    0163.8 :NO CARRIER
    0163.8 :+FRH=3
    0163.8 :>+FRH=3
    0164.6 :
    0171.2 :Recover modem
    0171.3 :unknown frame 0
    0171.3 :+FRH=3
    0171.3 :>+FRH=3
    0171.4 :
    0171.4 :OK
    0171.5 :+FRH=3
    0171.5 :>+FRH=3
    0173.5 :
    0173.5 :NO CARRIER
    0173.6 :+FRH=3
    0173.6 :>+FRH=3
    0175.7 :
    0175.7 :NO CARRIER
    0175.7 :+FRH=3
    0175.7 :>+FRH=3
    0177.8 :
    0177.8 :NO CARRIER
    0177.8 :+FRH=3
    0177.8 :>+FRH=3
    0179.6 :
    0179.6 :OK
    0179.6 :+FRH=3
    0179.6 :>+FRH=3
    0181.7 :
    0181.7 :NO CARRIER
    0181.7 :+FRH=3
    0181.7 :>+FRH=3
    0183.8 :
    0183.8 :NO CARRIER
    0183.8 :+FRH=3
    0183.8 :>+FRH=3
    0185.9 :
    0185.9 :NO CARRIER
    0185.9 :+FRH=3
    0185.9 :>+FRH=3
    0188.0 :
    0188.0 :NO CARRIER
    0188.0 :+FRH=3
    0188.0 :>+FRH=3
    0190.1 :
    0190.1 :NO CARRIER
    0190.1 :+FRH=3
    0190.1 :>+FRH=3
    0192.2 :
    0192.2 :NO CARRIER
    0192.2 :+FRH=3
    0192.2 :>+FRH=3
    0194.3 :
    0194.3 :NO CARRIER
    0194.3 :No carrier.
    0194.3 :state: TERMINATING
    0194.3 :>AT
    0194.5 :
    0194.7 :>H0
    0195.0 :
    0195.1 :>+FCLASS=0
    0195.2 :
    0195.5 :state: TERMINATING
    0195.6 :WIN32 TAPI soft close port
    0196.0 :voice enable
    0196.0 :Device match
    0196.0 :Name: Courier V.Everything EXT PnP (V90-x2)
    0196.0 :state: AUTORECEIVE
    0196.0 :Modem enabled.
    0196.0 :state: AUTORECEIVE
    0196.0 :state: AUTORECEIVE
    0196.0 :End of Send
    0199.0 :Get send event
    0199.0 :FAX : 2571
    0295.0 :Get send event
    0295.0 :FAX : 2571
    0295.0 :Event found
    0295.3 :Device match
    0295.3 :Name: Courier V.Everything EXT PnP (V90-x2)
    0295.3 :Start transmit
    0295.4 :Device match
    0295.4 :Name: Courier V.Everything EXT PnP (V90-x2)
    0295.4 :Start Send
    0295.4 :TAPI soft-open port
    1
    1
    0296.1 :state: INITIALIZING
    0296.1 :Setting modem…
    0296.2 :>AT
    0296.7 :
    0296.8 :>E0V1
    0297.0 :
    0297.3 :>AT&F&D2&C1&H1&R2&I0S7=55
    0297.5 :
    0297.6 :>ATS36=0
    0297.8 :
    0297.9 :>AT&H1&R2&I0
    0298.1 :
    0298.3 :>E0V1&D2S0=0S8=2
    0298.5 :
    0298.7 :>+FCLASS=1
    0298.7 :
    0299.7 :state: IDLE
    0299.7 :state: IDLE
    0299.7 :Setting speaker…
    0299.7 :>E0V1M1L1
    0299.9 :
    0299.9 :>+FCLASS=1
    0300.0 :
    38400
    0300.1 :state: DIALING
    0300.6 :Transmit Phase A begins
    0300.6 :=======================
    0300.6 :Connecting…
    0300.6 :>X4DT19074636657
    0330.2 :
    0330.2 :Connecting…
    0330.2 :Transmit Phase B begins
    0330.2 :=======================
    0330.2 :state: SENDING
    0330.2 :Negotiating…
    0330.3 :
    0330.3 :Invalid frame received
    0330.3 :+FRH=3
    0330.3 :>+FRH=3
    0330.4 :
    0330.4 :
    0330.4 :Invalid frame received
    0330.4 :+FRH=3
    0330.4 :>+FRH=3
    0332.5 :
    0332.5 :NO CARRIER
    0332.5 :+FRH=3
    0332.5 :>+FRH=3
    0333.0 :
    0333.0 :
    0333.0 :Invalid frame received
    0333.0 :+FRH=3
    0333.0 :>+FRH=3
    0335.1 :
    0335.1 :NO CARRIER
    0335.1 :+FRH=3
    0335.1 :>+FRH=3
    0337.2 :
    0337.2 :NO CARRIER
    0337.2 :+FRH=3
    0337.2 :>+FRH=3
    0339.3 :
    0339.3 :NO CARRIER
    0339.4 :+FRH=3
    0339.4 :>+FRH=3
    0341.5 :
    0341.5 :NO CARRIER
    0341.5 :+FRH=3
    0341.5 :>+FRH=3
    0343.6 :
    0343.6 :NO CARRIER
    0343.6 :+FRH=3
    0343.6 :>+FRH=3
    0344.7 :
    0344.7 :
    0344.7 :Invalid frame received
    0344.7 :+FRH=3
    0344.7 :>+FRH=3
    0346.8 :
    0346.8 :NO CARRIER
    0346.9 :+FRH=3
    0346.9 :>+FRH=3
    0349.0 :
    0349.0 :NO CARRIER
    0349.0 :+FRH=3
    0349.0 :>+FRH=3
    0351.1 :
    0351.1 :NO CARRIER
    0351.1 :+FRH=3
    0351.1 :>+FRH=3
    0353.2 :
    0353.2 :NO CARRIER
    0353.2 :+FRH=3
    0353.2 :>+FRH=3
    0355.3 :
    0355.3 :NO CARRIER
    0355.3 :+FRH=3
    0355.3 :>+FRH=3
    0357.4 :
    0357.4 :NO CARRIER
    0357.4 :+FRH=3
    0357.4 :>+FRH=3
    0359.5 :
    0359.5 :NO CARRIER
    0359.5 :+FRH=3
    0359.5 :>+FRH=3
    0361.6 :
    0361.6 :NO CARRIER
    0361.6 :+FRH=3
    0361.6 :>+FRH=3
    0363.7 :
    0363.7 :NO CARRIER
    0363.7 :+FRH=3
    0363.7 :>+FRH=3
    0365.8 :
    0365.8 :NO CARRIER
    0365.8 :No carrier.
    0365.8 :state: TERMINATING
    0365.8 :>AT
    0366.0 :
    0366.2 :>H0
    0366.5 :
    0366.6 :>+FCLASS=0
    0366.7 :
    0367.0 :state: TERMINATING
    0367.1 :WIN32 TAPI soft close port
    0367.5 :voice enable
    0367.5 :Device match
    0367.5 :Name: Courier V.Everything EXT PnP (V90-x2)
    0367.5 :state: AUTORECEIVE
    0367.5 :Modem enabled.
    0367.5 :state: AUTORECEIVE
    0367.5 :state: AUTORECEIVE
    0367.5 :End of Send
    0371.5 :Get send event

    #7565

    Anonymous
    Member

    The first thing I would try is set your modem to CLASS 2.0
    (I believe your USR Courier supports both CLASS 1 and CLASS 2.0. You need to set this up in the Fax Modem Setup in WinFax PRO.

    See if that makes any difference.

    #7566

    fbdenman
    Member

    I have configured the modem as Class 2.0 per your suggestion. Still no successful sends to the Sitka fax machines. But the log looks a lot different. Do you see any clues in it?

    Thanks.

    Frank


    1308.9 :Get send event
    1308.9 :FAX : 2571
    1308.9 :Event found
    1309.3 :Device match
    1309.3 :Name: Courier V.Everything EXT PnP (V90-x2)
    1309.3 :Start transmit
    1309.4 :Device match
    1309.4 :Name: Courier V.Everything EXT PnP (V90-x2)
    1309.4 :Start Send
    1309.4 :TAPI soft-open port
    1
    1
    1310.1 :state: INITIALIZING
    1310.1 :Setting modem…
    1310.1 :>AT
    1310.7 :<OK
    1310.7 :>E0V1
    1310.9 :<OK
    1311.1 :>AT&F&D2&C1&H1&R2&I0S7=55
    1311.3 :<OK
    1311.4 :>AT&H1&R2&I0
    1311.6 :<OK
    1312.2 :>E0V1&D2S0=0S8=2
    1312.4 :<OK
    1312.5 :>+FCLASS=2.0
    1312.6 :<OK
    1312.9 :>+FNR=1,1,1,0;+FCR=1;+FBO=0;+FCC=1,5,0,2,0,0,0,0
    1313.0 :<OK
    1313.5 :state: IDLE
    1313.5 :state: IDLE
    1313.5 :Setting speaker…
    1313.5 :>E0V1M1L1
    1313.6 :<OK
    1313.7 :>+FCLASS=2.0
    1314.2 :<OK
    1314.2 :Setting station identifier…
    1314.2 :>AT+FLI=”206-722-7579 “
    1314.8 :<OK
    1314.8 :Fine resolution…
    1314.8 :>+FIS=1,5,0,2,0,0,0,0
    1315.3 :<OK
    1315.3 :>+FNR=1,1,1,0
    1315.4 :<OK
    1315.4 :>+FCLASS=2.0
    1315.5 :<OK
    38400
    1315.5 :set h/w flow
    1315.5 :>+FLO=2
    1316.1 :<OK
    1316.1 :Class 2x send
    1316.1 :state: DIALING
    1316.7 :Transmit Phase A begins
    1316.7 :=======================
    1316.7 :Connecting…
    1316.7 :>X4DT19074636657
    1352.4 :<+FCO
    1352.4 :Connecting…
    1352.4 :Transmit Phase B begins
    1352.4 :=======================
    1352.4 :state: SENDING
    1352.4 :Negotiating…
    1367.0 :
    1367.0 :+FIS:1,3,0,2,0,0,0,0
    1367.1 :OK
    1367.1 :Call datalayer
    1367.1 :Sending +FDT
    1367.1 :>+FDT
    1367.2 :+FCS:1,3,0,2,0,0,0,0
    1367.2 :Training…
    1367.2 :=========DCS==========
    1367.2 :res : High
    1367.2 :doc res:ok
    1367.2 :rate : 9600 V29
    1367.2 :padding : 0
    1367.2 :length: unlimited
    1367.2 :width: 1728
    1367.2 :coding: 1D
    1367.2 :compr : No
    1367.2 :ecm : No
    1367.2 :frame : 256
    1367.2 :T.6 coding: No
    1367.2 :bft : No
    1367.2 :
    1375.4 :+FIS:1,3,0,2,0,0,0,0
    1383.8 :+FIS:1,3,0,2,0,0,0,0
    1384.1 :+FHS:25
    1384.1 :Fax complete.
    1384.1 :OK
    1384.1 :cleanup Class 2x
    1384.1 :state: TERMINATING
    1384.1 :>AT
    1384.3 :<OK
    1384.4 :>H0
    1384.6 :<OK
    1384.7 :>+FCLASS=0
    1384.7 :<OK
    1385.0 :state: TERMINATING
    1385.1 :WIN32 TAPI soft close port
    1385.4 :voice enable
    1385.4 :Device match
    1385.4 :Name: Courier V.Everything EXT PnP (V90-x2)
    1385.5 :state: AUTORECEIVE
    1385.5 :Modem enabled.
    1385.5 :state: AUTORECEIVE
    1385.5 :state: AUTORECEIVE
    1385.5 :End of Send
    1388.5 :Get send event
    1388.5 :FAX : 2571
    1484.5 :Get send event
    1484.5 :FAX : 2571
    1484.5 :Event found
    1484.8 :Device match
    1484.8 :Name: Courier V.Everything EXT PnP (V90-x2)
    1484.8 :Start transmit
    1484.9 :Device match
    1484.9 :Name: Courier V.Everything EXT PnP (V90-x2)
    1484.9 :Start Send
    1484.9 :TAPI soft-open port
    1
    1
    1485.6 :state: INITIALIZING
    1485.6 :Setting modem…
    1485.6 :>AT
    1486.2 :<OK
    1486.2 :>E0V1
    1486.4 :<OK
    1486.6 :>AT&F&D2&C1&H1&R2&I0S7=55
    1486.8 :<OK
    1486.9 :>AT&H1&R2&I0
    1487.1 :<OK
    1487.7 :>E0V1&D2S0=0S8=2
    1487.9 :<OK
    1488.1 :>+FCLASS=2.0
    1488.1 :<OK
    1488.4 :>+FNR=1,1,1,0;+FCR=1;+FBO=0;+FCC=1,5,0,2,0,0,0,0
    1488.5 :<OK
    1489.0 :state: IDLE
    1489.0 :state: IDLE
    1489.0 :Setting speaker…
    1489.0 :>E0V1M1L1
    1489.2 :<OK
    1489.2 :>+FCLASS=2.0
    1489.7 :<OK
    1489.7 :Setting station identifier…
    1489.7 :>AT+FLI=”206-722-7579 “
    1490.3 :<OK
    1490.3 :Fine resolution…
    1490.3 :>+FIS=1,1,0,2,0,0,0,0
    1490.8 :<OK
    1490.8 :>+FNR=1,1,1,0
    1490.9 :<OK
    1490.9 :>+FCLASS=2.0
    1491.0 :<OK
    38400
    1491.1 :set h/w flow
    1491.1 :>+FLO=2
    1491.6 :<OK
    1491.6 :Class 2x send
    1491.6 :state: DIALING
    1492.2 :Transmit Phase A begins
    1492.2 :=======================
    1492.2 :Connecting…
    1492.2 :>X4DT19074636657
    1522.1 :<+FCO
    1522.1 :Connecting…
    1522.1 :Transmit Phase B begins
    1522.1 :=======================
    1522.1 :state: SENDING
    1522.1 :Negotiating…
    1537.4 :
    1537.4 :+FIS:1,3,0,2,0,0,0,0
    1537.6 :OK
    1537.6 :Call datalayer
    1537.6 :Sending +FDT
    1537.6 :>+FDT
    1537.6 :+FCS:1,1,0,2,0,0,0,0
    1537.6 :Training…
    1537.6 :=========DCS==========
    1537.6 :res : High
    1537.6 :doc res:ok
    1537.6 :rate : 4800 V27t
    1537.6 :padding : 0
    1537.6 :length: unlimited
    1537.6 :width: 1728
    1537.6 :coding: 1D
    1537.6 :compr : No
    1537.6 :ecm : No
    1537.6 :frame : 256
    1537.6 :T.6 coding: No
    1537.6 :bft : No
    1537.6 :
    1547.5 :+FCS:1,1,0,2,0,0,0,0
    1547.5 :Training…
    1547.5 :=========DCS==========
    1547.5 :res : High
    1547.5 :doc res:ok
    1547.5 :rate : 4800 V27t
    1547.5 :padding : 0
    1547.5 :length: unlimited
    1547.5 :width: 1728
    1547.5 :coding: 1D
    1547.5 :compr : No
    1547.5 :ecm : No
    1547.5 :frame : 256
    1547.5 :T.6 coding: No
    1547.5 :bft : No
    1547.5 :
    1557.2 :+FCS:1,1,0,2,0,0,0,0
    1557.2 :Training…
    1557.2 :=========DCS==========
    1557.2 :res : High
    1557.2 :doc res:ok
    1557.2 :rate : 4800 V27t
    1557.2 :padding : 0
    1557.2 :length: unlimited
    1557.2 :width: 1728
    1557.2 :coding: 1D
    1557.2 :compr : No
    1557.2 :ecm : No
    1557.2 :frame : 256
    1557.2 :T.6 coding: No
    1557.2 :bft : No
    1557.2 :
    1564.9 :+FHS:02
    1564.9 :Fax complete.
    1564.9 :OK
    1564.9 :cleanup Class 2x
    1564.9 :state: TERMINATING
    1564.9 :>AT
    1565.1 :<OK
    1565.2 :>H0
    1565.4 :<OK
    1565.5 :>+FCLASS=0
    1565.6 :<OK
    1565.8 :state: TERMINATING
    1565.9 :WIN32 TAPI soft close port
    1566.3 :voice enable
    1566.3 :Device match
    1566.3 :Name: Courier V.Everything EXT PnP (V90-x2)
    1566.3 :state: AUTORECEIVE
    1566.3 :Modem enabled.
    1566.3 :state: AUTORECEIVE
    1566.3 :state: AUTORECEIVE
    1566.3 :End of Send
    1569.3 :Get send event
    1569.3 :FAX : 2571
    1665.3 :Get send event
    1665.3 :FAX : 2571
    1665.3 :Event found
    1665.6 :Device match
    1665.6 :Name: Courier V.Everything EXT PnP (V90-x2)
    1665.6 :Start transmit
    1665.7 :Device match
    1665.7 :Name: Courier V.Everything EXT PnP (V90-x2)
    1665.7 :Start Send
    1665.7 :TAPI soft-open port
    1
    1
    1666.4 :state: INITIALIZING
    1666.4 :Setting modem…
    1666.5 :>AT
    1667.0 :<OK
    1667.1 :>E0V1
    1667.2 :<OK
    1667.5 :>AT&F&D2&C1&H1&R2&I0S7=55
    1667.7 :<OK
    1667.7 :>AT&H1&R2&I0
    1668.0 :<OK
    1668.5 :>E0V1&D2S0=0S8=2
    1668.7 :<OK
    1668.9 :>+FCLASS=2.0
    1669.0 :<OK
    1669.3 :>+FNR=1,1,1,0;+FCR=1;+FBO=0;+FCC=1,5,0,2,0,0,0,0
    1669.3 :<OK
    1669.8 :state: IDLE
    1669.8 :state: IDLE
    1669.8 :Setting speaker…
    1669.8 :>E0V1M1L1
    1670.0 :<OK
    1670.0 :>+FCLASS=2.0
    1670.6 :<OK
    1670.6 :Setting station identifier…
    1670.6 :>AT+FLI=”206-722-7579 “
    1671.1 :<OK
    1671.1 :Fine resolution…
    1671.1 :>+FIS=1,0,0,2,0,0,0,0
    1671.7 :<OK
    1671.7 :>+FNR=1,1,1,0
    1671.7 :<OK
    1671.7 :>+FCLASS=2.0
    1671.8 :<OK
    38400
    1671.9 :set h/w flow
    1671.9 :>+FLO=2
    1672.5 :<OK
    1672.5 :Class 2x send
    1672.5 :state: DIALING
    1673.0 :Transmit Phase A begins
    1673.0 :=======================
    1673.0 :Connecting…
    1673.0 :>X4DT19074636657
    1701.7 :<+FCO
    1701.7 :Connecting…
    1701.7 :Transmit Phase B begins
    1701.7 :=======================
    1701.7 :state: SENDING
    1701.7 :Negotiating…
    1709.7 :
    1709.7 :+FIS:1,3,0,2,0,0,0,0
    1709.9 :OK
    1709.9 :Call datalayer
    1709.9 :Sending +FDT
    1709.9 :>+FDT
    1710.0 :+FCS:1,0,0,2,0,0,0,0
    1710.0 :Training…
    1710.0 :=========DCS==========
    1710.0 :res : High
    1710.0 :doc res:ok
    1710.0 :rate : 2400 V27t
    1710.0 :padding : 0
    1710.0 :length: unlimited
    1710.0 :width: 1728
    1710.0 :coding: 1D
    1710.0 :compr : No
    1710.0 :ecm : No
    1710.0 :frame : 256
    1710.0 :T.6 coding: No
    1710.0 :bft : No
    1710.0 :
    1721.2 :CONNECT
    1721.2 :Transmit Phase C begins
    1721.2 :=======================
    1721.2 :Sending page (MH)…
    1721.2 :Open image file
    1721.2 :filesize: 42829
    1721.3 :Data sent to fax…
    1835.1 :Tranmsit Phase D begins
    1835.1 :=======================
    1835.1 :Negotiating…
    1865.1 :cleanup Class 2x
    1865.1 :state: TERMINATING
    1865.1 :>AT
    1866.7 :<OK
    1866.8 :>H0
    1867.0 :<OK
    1867.1 :>+FCLASS=0
    1867.2 :<OK
    1867.4 :state: TERMINATING
    1867.5 :WIN32 TAPI soft close port
    1867.9 :voice enable
    1867.9 :Device match
    1867.9 :Name: Courier V.Everything EXT PnP (V90-x2)
    1867.9 :state: AUTORECEIVE
    1867.9 :Modem enabled.
    1867.9 :state: AUTORECEIVE
    1867.9 :state: AUTORECEIVE
    1867.9 :End of Send
    1871.9 :Get send event

    #7567

    Anonymous
    Member

    It could very well be a line noise problem, and there is nothing much you can do on your configuration. The log shows that it is negotiating, but failing during training. It then repeats the steps at a lower baud rate to compensate for line noise problems. Once it reaches 2400 bps without success (the lowest sending rate), it will disconnect and log as a failure in the WinFax logs.

    One way to confirm if it is a line problem is to try using another fax modem (different fax model) and see if the results are the same, or using a regular fax machine (if you have one) from the same location to send a fax to the same recipient.

    #7568

    fbdenman
    Member

    Well, this Courier v.Everything is the second modem I’ve tried. The first was SupraFaxModem 288. Neither worked. Now these are of course older modems, but the Courier has been flashed to v.90 on data and has been superior in everything I’ve used it for.

    Has *fax* processing changed enough in the last 6-8 years that it might be worth trying a current modem?

    Thanks!

    Frank

    #7569

    Anonymous
    Member

    @fbdenman wrote:

    Well, this Courier v.Everything is the second modem I’ve tried. The first was SupraFaxModem 288. Neither worked. Now these are of course older modems, but the Courier has been flashed to v.90 on data and has been superior in everything I’ve used it for.

    Has *fax* processing changed enough in the last 6-8 years that it might be worth trying a current modem?

    Thanks!

    Frank

    Do you know what type of fax machine, or fax device they are using?

    All fax machines/modems are backward compatible, so even with an older fax machine or fax modem it should work. 14.4kbps transmission is still the standard speed for faxing.

    Although its old, the Supra FaxModem 28.8kbps is an excellent fax modem for WinFax PRO.

    If you like, I can try sending a test fax to that number you’re having problems with. I’m using a Rockwell Based 14.4kbps External Fax/Voice modem with WinFax PRO.

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.