Fax Software

Community Forums

This topic contains 5 replies, has 0 voices, and was last updated by  admin 9 years, 7 months ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #3166

    sbales31
    Member

    Hello,

    I am trying to use winfax to send mass faxes. I have things set up to use fax sharing. We are sending the mass faxes from the client. The message that we are getting is “Access is denied. on last attempt”

    Sending a normal fax works fine.

    Thanks in advance for the help!

    #5946

    admin
    Keymaster

    Can you provide more details? Are you getting Access Denied when you are trying to connect to a WinFax Host machine?

    using WinFax PRO 10.03 on client and host? Windows XP? Service Packs?

    #5947

    sbales31
    Member

    We are using winfax 10.03 on client and host Windows XP service pack 3. The access denied error is displayed within winfax pro. When you go into Winfax Message manager and look at the Send log. All of the faxes that failed are listed with a red X. Selecting a record allows you to look at the details. In the details it says: Access is denied. on last attempt.

    #5948

    admin
    Keymaster

    On the client, close the Controller (right click the yellow-icon in the system tray and click Exit) then restart the WinFax Controller. If you are connected to the Host, you should see a Please Wait message followed by a large dialog box appear with Receive Now, Show All Messages and Close buttons.

    Do you see this ? or do you get an error message when it attempts to connect to the Host?

    #5949

    sbales31
    Member

    No that works fine.

    #5950

    admin
    Keymaster

    So if you send a single fax through the client, it will transmit the fax to the Host, and the Host sends the fax?

    Can you describe how you are sending the mass faxes?

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.