Fax Software

Community Forums

This topic contains 3 replies, has 0 voices, and was last updated by  Anonymous 15 years, 3 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #3408

    Anonymous
    Member

    Is it possible to have winfax pro use more than one modem at the same time on my Win XP PC.
    I have two lines, and hopefully I can install a second modem.
    I am hoping to make faxing to multiple destinations faster.
    I use faxes for markerting purposes.
    I am wondering if somebody has tried this before I go thorugh the hassle.
    Thanks.

    #6658

    Anonymous
    Member

    Yes, WinFax PRO 10 will support 2 modems and will send and or receive at the same time.

    #6659

    Anonymous
    Member

    Thank you very much for your reply.

    I have already tried it and had to struggle with a number of fax/modem cards before I could get it to work. I found a document in the support area on Symantec site explaining things about using different types of cards (or different drivers) and the use of “TAPI” and “COM?” combination.

    Anyway, it was a good exercise and I am glad with the result now that everything is working fine.

    Thank you once again for your reply.

    #6660

    Anonymous
    Member

    Yes, two of the same modems might give you problems but if you use two different modems you might be better off. I recommend buying old EXTERNAL modems from eBay, such as the Supra 28.8KBps Fax Modem or the 14KBps Fax Modem. Get a dual serial port in your PC and hook them up. It works great.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.