Fax Software

Community Forums

  • This topic is empty.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #3067
    webra
    Member

    After the trouble-free installation of Winfax per 9 (in the compatibility mode) I can send under Vista + FritzCard PCI 2.0 faxes and receive. Also the scanner (runs under Vista with TWAIN drivers) is recognised by Winfax and is integrated and called. Unfortunately, scanned texts are not indicated in Winfax and cannot be sent. Presumably it is due to the fact that the printer driver was not integrated. In the printer menu no Winfax printer is can be found. How can I integrate the driver manually?

    Greets and thanks
    Werner Brandner

    #5721
    JohnD
    Participant

    WinFax PRO 9.0 doesn’t have a feature to reinstall the WinFax printer driver, but you may want to look at this support document:

    http://service1.symantec.com/SUPPORT….7453904

    #5722
    webra
    Member

    Hello JohnD

    many thanks for the tip! Unfortunately, it has not worked. Moreover, Winfax irritates me by every start with an error message. Now I have procured for myself the Fritz fax software of AVM. With it one can work easily. Unfortunately, not so comfortably as with Winfax.

    Greets and thanks
    Werner Brandner

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.