Fax Software

Community Forums

Forum Replies Created

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • October 29, 2008 at 9:39 am in reply to: Winfax stops answering – unable to recieve #7944
    chiv35
    Member

    I will try these settings and let you know..thanx very much

    October 28, 2008 at 12:31 pm in reply to: Winfax stops answering – unable to recieve #7942
    chiv35
    Member

    the modem settings are
    TAP1 speed-19200
    Class 1 modem type
    connected to- reg or cell (PCS/GSM digital

    Maximum- as fast as possible
    Minimum- Send at any rate

    String- AT&F&D2&C1&K3S7=55
    high pspeed comp is ticked
    Flow control AT+K3

    Reset- ATZ

    And also when we re-start the pc it is okay for a while.

    October 28, 2008 at 10:35 am in reply to: Winfax stops answering – unable to recieve #7941
    chiv35
    Member

    It is only some faxes it fails on and tells me that the modem needs powering?

    The modem is an etec al56uh usb modem..Spec is at this link USB Modem

    October 24, 2007 at 7:34 am in reply to: Problem Sending Faxs – Only some of the fax is recieved #7691
    chiv35
    Member

    Thank you very much for the settings. I will try them out and see how I get on…

    cheers

    October 23, 2007 at 10:43 am in reply to: Problem Sending Faxs – Only some of the fax is recieved #7689
    chiv35
    Member

    Right here goes:

    Initialization string sequnce:AT&F&D2&C1+IFC=2,2;S7=55

    Flow Control:AT+IFC=2,2; (use hardware flow control is ticked)

    Rest: ATZ

    I think that is all on that part. What do think to those settings? do you think that is what is making this problem occur?

    Thanx

    October 18, 2007 at 8:25 am in reply to: Problem Sending Faxs – Only some of the fax is recieved #7687
    chiv35
    Member

    Thanks for the reply John. I have a soft V90 Data fax modem set up on TAPl and running and initialized at 19200.

    Transmition speed : Maximum is set to “as fast as possible” and minimum : is set to ” send at any rate.

    Options are at “high compression”
    Modem is class1

    Not sure how to change configurations and wondered if anyone can see any problems with these.

    There are other modems in the box, like concorde and am not sure what this is?

    Thank you

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)