Fax Software

Community Forums

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 15 total)
  • Author
    Posts
  • September 15, 2009 at 7:40 pm in reply to: Cannot check for received events on client #8692
    mderoo
    Member

    It’s an serial (analog) modem attached to COM1, serial port is added to the virtual machine.

    And it is not happening al the time!

    It happened twice, for now.

    As I said earlier there is an extra hd with only Windows XP Home, for testing purposes.

    September 12, 2009 at 10:35 pm in reply to: Cannot check for received events on client #8690
    mderoo
    Member

    But what is the problem of running Winfax inside a Virtual Machine (XP).

    Winfax crashed again after receiving a fax, but I can’t reproduce the steps.

    I also have an extra harddisk with only Windows XP Home, in the Win2K8 machine.

    I will try if I can find a way to reproduce it to see if it caused by running inside a Virtual Machine.

    September 11, 2009 at 8:34 am in reply to: Cannot check for received events on client #8688
    mderoo
    Member

    Yes, the host is running in a virtual machine.

    It happend only one time, the crash!

    I only have 1 server that’s always on!

    It to expansive to have ans second computer online 24 hours a day, electricity and XP license and the hardware!

    I will soon have an HP 6500 All in one inktjet printer, wich can also fax. Only not sure if I can send to it from a pc (fax)!?

    September 9, 2009 at 8:24 pm in reply to: Cannot check for received events on client #8686
    mderoo
    Member

    The host was receiving a fax

    September 9, 2009 at 7:09 pm in reply to: Cannot check for received events on client #8684
    mderoo
    Member

    And about the crash?

    September 9, 2009 at 1:38 pm in reply to: Cannot check for received events on client #8682
    mderoo
    Member

    Winfax crashed!

    Controller: WFCTL32.exe Program error

    instruction: 0x7c911689 to memory: 0x00000000, read failed

    Do you now what can be the cause of this?

    September 9, 2009 at 12:44 pm in reply to: Cannot check for received events on client #8681
    mderoo
    Member

    failed one out of two times sending to you.

    I will try to send again!

    September 9, 2009 at 12:43 pm in reply to: Cannot check for received events on client #8680
    mderoo
    Member

    When I get a fax from the internet with a dutch number it works fine, now errors.

    Junk Fax is disabled!

    Only when receving a fax from you from the States, something goes very wrong.

    One out of two times it failed the first time.

    Maybe a bad line!

    September 8, 2009 at 10:52 pm in reply to: Cannot check for received events on client #8677
    mderoo
    Member

    Somebody from an unkown number is sending me an fax, only it says completed and nothing is comming in the received folder! It repeat a couple of times! I think something is going wrong!

    September 8, 2009 at 10:21 pm in reply to: Cannot check for received events on client #8676
    mderoo
    Member

    It’s now running under Win2K8 with VMware Player, with serial port emulation and as Guest Win XP PRO.

    The first time I send an fax to you, it failed, but the second time, it worked fine.

    Now going to send multiple pages to a Dutch number.

    Is 10.04 not required, or bether to use 10.03 as host?

    September 8, 2009 at 8:00 pm in reply to: Cannot check for received events on client #8674
    mderoo
    Member

    Is it possible to send an Test Fax to you and that you send me one back?

    September 8, 2009 at 7:50 pm in reply to: Cannot check for received events on client #8673
    mderoo
    Member

    It works now!

    September 8, 2009 at 7:50 pm in reply to: Cannot check for received events on client #8672
    mderoo
    Member

    It seemd that sharing was not correctly configured, it is Windows Home :S

    Think I bether use XP Pro!

    So guest account is not needed!

    September 8, 2009 at 7:05 pm in reply to: Cannot check for received events on client #8671
    mderoo
    Member

    I found out that I needed to enable the Guest account on the host!

    But now when I sent a fax, on the host it says send o.k., but on the client it says not send!

    September 8, 2009 at 6:24 pm in reply to: Cannot check for received events on client #8669
    mderoo
    Member

    This error I am getting on the client!:

    DCOM can’t use any of the protocols that are configured to communicate with your computer: marco2

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 15 total)