Support, News and Updates

Support

Using CallClerk with the Conexant USB Voice Fax Modem.

If you use CallClerk Caller ID software, or other voice software that uses direct TAPI to play and record audio, you will be required to install the GetFaxing.com Fax Voice Modem Drivers. This document will guide you with the installation of the proper drivers for your voice modem. First time install. Insert the GetFaxing.com Conexant […]

Unimodem Modem Audio sound driver missing in Windows 10

Microsoft Windows 10 Version 1511 (Build 10586 and later) have a Unimodem problem that prevents voice modems from installing the Unimodem Full Duplex or Half Duplex Audio Driver.  This prevents some TAPI Voice applications from properly detecting the modem as a voice modem, and/or prevent the modem from playing back any audio to the modem. […]

Problems sending or receiving faxes with FaxTalk

Faxes can fail during sending or receiving for a variety of reasons. The following are some possible causes for failure to transmit or receive faxes. NOTE: The following suggestions are for issues where faxes attempt to be sent or received but fail during transmission. Reliability issues with the modem hardware or modem drivers Many of […]

Using two / dual fax modems with WinFax

WinFax PRO will support a maximin of 2 modems on a single PC. If you need to have dual modems, I’d recommend ensuring both modems are different, otherwise, you may run into difficulties. Two external controller based modems are best, or one external controller-based and one internal controller-less. You can try two controller-less modems, but […]