Fax Software

Community Forums

  • This topic is empty.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
  • #3904
    FSM 321

    I am using Trend Model TFM 560X modem and running Xp Pro with SP2 on a Pentium 4 Dual Core CPU. I can fax out w/o any problem. On incoming the modem trains and answers but it then cancels. I get the message “Call Canceled” after. This occurs whether I receive manually or automaticly.


    Check out this topic on the Trendnet modem, you might want to try updating the drivers for the modem if you have not already done so. Steps are indicated on the Trendnet web page link



    LT/Agere fax modems suggested initialization string settings under Modem settings:

    Suggested Initialization String: AT&F&C1&D2S7=60
    Hardware Flow Control:
    Software Flow Control: ATQ1 or AT&K4

    Uncheck “Use hardware flow control.”
    Uncheck everything under Options.

    Edited By Moderator on 1170360331


    Try this:

    Line 1 : AT&F&C1&D2S7=90
    Line 2 : AT&K4

    Uncheck “Use hardware flow control”

    or try

    Line 1: AT&F&C1&D2S7=90
    Line 2 : ATQ1

    Uncheck “Use hardware flow control”

    if you are receiving faxes that are failing from the same person, try a different fax machine. It is possible the fax machine that is sending to you is incompatible with your fax modem. In that case, install and use a different fax modem.

    Edited By Moderator on 1170563530

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.