Fax Software

Community Forums

  • This topic is empty.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • December 1, 2005 at 9:15 pm #3830
    ptburly
    Member

    Running Win 2000 with a (new) U.S. Robotics V.92 modem. Installed new modem and drivers after having Winfax work for a year. Winfax dials and attemps to train then drops off and trys again. I can here the initial modem sound but nothing after that. I read another post for the same problem and attempted the solution, but the modem type was different and the initiallation string was not the same.
    My string is:
    Line 1: AT&f&D2&C1&H1S7=55
    Line 2: ATS36=0
    Flow Control:AT&H1
    Any suggestions?

    December 11, 2005 at 9:31 pm #8128
    Anonymous
    Member

    @ptburly wrote:

    Running Win 2000 with a (new) U.S. Robotics V.92 modem. Installed new modem and drivers after having Winfax work for a year. Winfax dials and attemps to train then drops off and trys again. I can here the initial modem sound but nothing after that. I read another post for the same problem and attempted the solution, but the modem type was different and the initiallation string was not the same.
    My string is:
    Line 1: AT&f&D2&C1&H1S7=55
    Line 2: ATS36=0
    Flow Control:AT&H1
    Any suggestions?

    remove ATS36=0 , might not be needed.

    January 16, 2006 at 9:00 pm #8129
    Anonymous
    Member

    I had the same issue; finaly it was my US Robotics MODEM that was set as a class 1 fax.

    I Switch it as a class 2.0 and VOILA !

    Good Luck.
    Nick

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.