Fax Software

Community Forums

  • This topic is empty.
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #3664
    dolphinren
    Member

    Now, I am using WinFax Pro with a Bell phone line. How could I add another phone line (IP) ? Does WinFax support multiple Modem ?

    David.

    #7598
    admin
    Keymaster

    WinFax will support up to 2 modems using TAPI/Com port, I recommend two different modems. Do not use two “software” based or “Winmodems” on the same PC. Also stay away from “USB” type modems.

    Recommended types:
    Hardware based internal modems (avoid cheaper software based modems)
    External Serial Port only modems (RS-232 9 pin or 25 pin type, not USB)

    as for using IP (internet) to send faxes, WinFax only supports Concord service provider for internet faxing. It is not free, http://www.concordfax.com for details.

    Edited By Moderator on 1179422874

    #7599
    dolphinren
    Member

    Thank you a lot.

    But, how to set up those two modems in WinFax Pro ?

    #7600
    admin
    Keymaster

    same setup as one modem,should both appear under Modems and Communications devices settings

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.